美國PARKER電磁閥操作說明

用防爆電磁閥的D1VW是基于
標準D1VW系列。具體電磁設計
允許在危險環境中的使用情況。
防爆類
前êMB II T4千兆

在1區和2使用（符合ATEX）。另外
電磁閥是IECEx標準。
所有防爆電磁閥是直流設計。閥門
交流與操作集成整流器。
為了進一步防爆閥請參閱目錄
HY11-3343。

美國PARKER電磁閥操作說明

The D1VW with explosion proof solenoids is based on
the standard D1VW series. The specific solenoid design
allows the usage in hazardous environments.
The explosion proof class is
Ex e mb II T4 Gb
for use in zone 1 and 2 (according to ATEX). Additionally
the solenoids are IECEx compliant.
All explosion proof solenoids are DC design. The valves
for AC operate with integrated rectifier.
For further explosion proof valves please refer to catalogue
HY11-3343.

下圖閥移位限制
交流和直流電磁鐵。該規范適用于
402 / s的粘度和平衡流動條件。該
移限制可以在不平衡的流動相當低
條件。以避免出移限制流速，一
插件孔可以插入在P-端口。

The diagram below specifies the shift limits for valves
with AC and DC solenoids. The specifications apply to a
viscosity of 40 mm2/s and balanced flow conditions. The
shift limits can be considerably lower at unbalanced flow
conditions. To avoid flow rates beyond the shift limits, a
plug-in orifice can be inserted in the P-port.